• DBLC-TET-N | TETRA Branch Line Combiner
When you can only fit one antenna on a vehicle, then this combiner is the solution providing > 26dB isolation over 380-430MHz with an antenna match at 1.2:1 with low insertion loss.

Combines two TETRA radios on the same antenna
Combines two antennas on the same radio

Technical Note:


The isolation provided by this device is dependent on the antenna VSWR. An antenna match of 1.5:1 VSWR will result in a reduction of isolation to 20dB.

Higher VSWR on the antenna port will result in a further reduction in isolation between the TX ports.

During operation extreme care should be taken to ensure that the VSWR of the antenna connected to the combiner does not exceed 1.5:1.

Electrical Data
UHF (340-520MHz) 380-430
Max Input Power (W) 20
Insertion Loss (dB) <0.5
Splitter Type TETRA Splitter
Mechanical Data
Available Colours Black
Length (mm) 72
Width (mm) 72
Height (mm) 23
Connector N (f)
Operating Temperature -40 / + 80°C

DBLC-TET-N | TETRA Branch Line Combiner

  • Product Code: DBLC-TET-N

 

Request Quotation

Download Catalogue

Join Mailing List

Contact Us:

UK Head Office:
Tel: +44 208 877 4444
Email: [email protected]

USA Office:
Tel: +1 817 539 1888
Email: [email protected]

Australia Office:
Tel: +61 8 9314 1381
Email: [email protected]

France Office:
Tel: +33 5 54 07 04 36
Email: [email protected]

Singapore Office:
Tel: +65 69 62 68 70
Email: [email protected]


Tags: TETRA Branch Line Combiner